It is estimated that the average Kennesaw homeowner doles out on average $400 to $500 per year on plumbing-related costs, including hiring a plumber, buying plumbing parts and supplies and ordering an off-hour plumbing repair. Does it seem time-consuming, expensive and stressful? It doesn’t have to be.

Old Man Winter is soon to make his triumphant return and wreak havoc on adults, children, roads, vehicles and homes. The winter season can cause numerous problems for your home, including the plumbing components. Whether it’s water freezing or a cracked pipe, any tiny problem, if not remedied, will lead to significant issues in your home.

Most plumbing industry professionals in Kennesaw will encourage homeowners to regularly care for and maintain pipes, water hoses, water tanks and much more. By doing so, homeowners can refrain from spending hundreds of dollars in the future because of a flooded basement or a damaged faucet. Preventative measures must be taken during those cold, cold months.

Homeowners don’t have to roll up their sleeves and spend an entire day making preparations. Instead, simple things can be done, such as removing leaves from gutters, insulating pipes in unheated areas and perhaps even requiring the services of an experienced plumber to inspect your home’s plumbing system to ensure you’re prepared for the upcoming months.

Always use top plumbing product brands when making repairs in the bathroom, on commercial jobs, when drain cleaning and making toilet repairs. We use Delta, Toto, Insinkerator

Before the winter season begins, a lot of plumbers will state that the most common problem they notice is that homeowners – and even cottage owners – will not take the necessary steps to take care of their plumbing. Here are some additional precautions to take now to avoid a huge heating and plumbing bill in spring.

Run the water

At least once a week, remember to run the water from each valve of your home at regular intervals throughout the entire winter season. By doing so, you will avoid freezing, which can cause serious damage to your pipes.

Holiday cooking

Winter usually means the holidays, which comes with a lot of cooking. However, it’s imperative that the cook of the house is extremely careful to avoid pouring oils and grease down the drain because these can clog up when the plumbing is colder.

Disconnect

If garden hoses are not disconnected for the winter then they can cause major damages. When extreme cold weather arrives, ice will form and pressure will build up in the water lines of your home, but again only if the garden hose is connected.

Warm air

It’s best to keep your home warm between November and March because warm air circulation will keep pipes from freezing. At least once a week, keep cabinet doors under sinks and near exterior walls open. It is recommended that a home’s temperature should be 59 degrees Fahrenheit (15 degrees Celsius).

Water heater

One simple tip is to close crawl space areas, vents and windows in the vicinity of where your water heater is placed. It’s crucial to avoid cold air entering and forcing the water heater to work harder than it already does or perhaps even freeze a nearby pipe.

Article Source: http://EzineArticles.com/8096577

Where the home is concerned, having a well working plumbing system is best to help keep the home safe. Selecting a plumber in Kennesaw can be very stressful especially if you do not know where to start. Not just any one qualifies to be a plumber although they might claim they are. Also, there are expert plumbers who do not know anything about how to treat or even talk to customers t ensure a good relationship. There are so many factors that should affect your choice of a plumber where your home is concerned.

Selecting a plumber is a process which has to be gone through with utmost care and patience. First of all, you can start by asking friends, colleagues or even neighbors. This helps to give you the assurance of their credibility. Although most people do not feel this is an appropriate method, it is advisable to use a plumber who is recommended and has a good review from your friends, family or even neighbors.

If the above does not work for you, you can check through the directory to find some expert plumbers to do the job for you. One downside though where using the directory is the fact that you might not be able to know whether the plumber is an expert as they claim because being in the phone directory does not mean they are credible enough. A good plumber does not only have to be good on the job but also where customer services and relation is concerned. Before you call them though make sure you have an idea of what the problem and never settle with calling just one plumber. Call more than one plumber and depending on how each one speaks you will be sure of whom you want to work for you.

You can also decide to use online search engines to find the best plumbers for your home. Online search engines provide you with a long list of plumbers in your area that you can decide to choose from. Make sure you check if the plumber has a website which is important to tell how credible they are and also read reviews on the plumbers web page to tell if he or she is really the right person for the job. If these plumbers have websites it makes contacting them online very easy since most times you can be lucky to get a live chat session with them. Do not give your home address to any online plumber but you can schedule a meeting at the plumber’s office to have a talk to him or her. It is advisable to have an interview with 10 plumbers in your area to make sure you make the right decision.

Also, make sure you ask for price quotes to make sure what they are asking fits into your budget but do not be carried away by those plumbers that offer you very cheap price quotes because you might regret it. You can also decide to contact contractors or builders in your area since they mostly know some credible city plumbers that can give you a perfect plumbing fix where your home is concerned.

If you are not able to go through this selection process before an emergency occurs, you can call the first number you see in your directory and show them to your home but make sure you ask for an estimated price after they have checked what the problem is before you allow them to go on with work.

Never take the safety of your home for granted by employing the services of any plumber you do not even know. Love your home and love your life by employing a quality licensed plumbing contractor to fix any plumbing issues like sewer repair, water heaters and leaking water lines for your home.

Article Source: http://EzineArticles.com/715085

The first step to becoming a successful homeowner or renter in Kennesaw is knowing basic emergency plumbing tips. It is no longer news that the joy of owning a home vanishes when a busted water line or backed up toilet creates an inconvenient, if not disastrous mess. The frustration of an emergency plumbing problem is even more intense if house occupants are totally ignorant of how their plumbing system works or where the control valves are located. This is something you should cover with the entire family before an emergency plumbing problem occurs.

I agree that not everyone is gifted with plumbing skills and we all cannot be plumbers. However, it does not hurt to know the basics of your home plumbing system, just in case your water line chooses to burst and flood your house when you cannot get a hold of a plumber immediately.

A broken water pipe is not the only emergency plumbing problem to watch out for. Clogged drains, frozen pipes and sewer backup are some of the other common emergency plumbing issues. A clogged drain slows or stops water from flowing in the drainage system and in a worst case scenario, the whole plumbing system blocks to a halt and occupants cannot use water anywhere in the house without having an overflow situation. The key to averting the ugly situation described above is knowing the basics about your plumbing systems and ultimately having an idea of what to do in plumbing emergencies.

Water leak or broken pipe

It is important to know the location of all of the shut-off valves controlling water supply to your utilities and appliances in the kitchen, bathroom, toilet, basement and yard. Carefully inspect your kitchen sink, toilet pipes, water heaters, heating systems, tubs and other appliances to locate the shutoff valve feeding water into them.

Another very important valve you must know the location is the main shutoff valve supplying water to your entire house. If you cannot find the shut-off valve for your systems or if you are not sure where to look, ask your plumber anytime you have him working at your house. Getting this information from a professional will help boost your confidence when you have to deal with an emergency water leak and broken pipe because then you know for sure what to turn off. You will still need to call a plumber to repair a water leak or broken pipe but putting everything under control first and taking your time to find the right plumber save you the money that you would have used to hire an emergency plumber.

DIY Broken Pipe Solution

Before you call a plumber, here is what you can do to control emergency broken pipe: Stop water from getting to the point where the pipe is broken by turning off every valve feeding water to that broken or leaky pipe. If there are no independent shutoff valves to stop water flowing to the broken pipe, then you will have to turn off the main valve supplying water to the whole house. Sometimes, shutting off water supply to the broken pipe will not stop flow of water through it immediately. In which case, you will need to open all cold water faucets in order to completely let out water in the entire system. Please note that Only cold water faucets should be turned on and not hot water faucets.

If you follow the simple steps outlined above, you will be able to control any emergency plumbing problem that results from a broken or leaky pipe. When the situation is under control, you will have a better judgment in your choice of a plumber for repairs.

Article Source: http://EzineArticles.com/6275929

A Less Expensive Way to Fix a Leaking Water Pipe

We recently were performing an alteration to a customer’s house in Kennesaw. This was an old house built in 1946. The original water pipes were run in galvanized pipe. Over the years the pipes had deteriorated and had become very brittle. When we began to apply a section of wall board to the unfinished wall, we inadvertently moved one of the pipes. The movement of the pipe caused a leak at a rusted joint in the pipe.

The first thing we did was turn the water off. There is usually a “shut off valve”, at the outside wall of the house. If there is, it most likely will be located on a line feeding one of the hose bibs. Next we used an acetylene torch to dry the pipe. You might use a hand held heater gun. You should be able to buy one at your local hardware store for less than forty dollars.

If in your case, the leak is behind the wall you need to locate the leak with a leak detector. A leak detector can be purchased for about thirty dollars. If you can’t get one locally go to the link called “contractor supplies”. You will be able to purchase both or all the items you need there.

In our case the leak was exposed to view, so after turning the water off at the meter (this house did not have a shut off valve). We dried the pipe, wire brushed the leak location, then with a pair of scissors, neatly cut a strip of tin foil about ten inches long. The leak was in a one inch pipe so the tin foil was folded in half. To the tin foil, a film of PERFECTLY mixed two part epoxy was applied then wrapped around the pipe at the spot of the leak and about a half inch in both directions away from the location of the leak.

The tin foil served as a type of form or dam to hold the epoxy in place allowing it to cure without displacement, similar to wood forms used to contain wet concrete until it has had the time required to setup. The next day we turned the water back on. You should open a few faucets in the house before turning the water on.

Leak fixed, and no expensive plumbing contractor costs. This will work on copper or PVC pipe. With PVC pipe you may need to roughen the pipe with a file, wire brush, small grinder or a similar tool. With both copper and PVC you should use the appropriate pipe cleaner readily available at any hardware store. I recommend wearing rubber gloves to make a repair to any pipe with the procedures and materials as described here.

Article Source: http://EzineArticles.com/5745544

So you want to be a plumber, and a licensed one at that? And you want it as a serious profession and not just to acquire the skills that you’ll need if you have to fix some of the plumbing in your own home. No, it is more than simply being a handyman and you want to take advantage of the opportunity to become a licensed plumber. After all, there’s proof that being a plumber is becoming one of the top occupations in the country.

Indeed, the profession of plumbing is growing much faster than any other occupation here in the US. The expected growth is as much as 26 percent over the next decade from 2010 to 2020, and that’s nothing short of an incredible growth, with the figure being supplied by the Bureau of Labor Statistics. It seems that qualified plumbers are getting to be a little scarce, which means that there is indeed an increase in demand for those who are licensed.

This increased opportunity for new plumbers is heightened by the fact that the pay is also quite good, the median pay being around $47,000 back in 2010. So if you want to know how to become a licensed plumber, simply read on. Just remember though that each city and state might have licensing requirements that are distinct from one another.

Here are the tips on how you can be licensed:

You need to know what kind of license you are going to need. Check out your local and state licensing boards for you to know exactly what type of license you’ll need. Most likely, you’ll need both a business and contractor’s license. However, regardless of where you are and what state you are in, what’s most likely to happen would be that you will first get a journeyman’s license and in time it would improve to become a master plumber’s.

The next thing to do would be to check with the licensing board in order for you to know what the requirements for a license are. Usual requirements include two to five years as an apprentice plus displaying some familiarity with local plumbing codes and then to pass an exam that test for the degree of one’s plumbing skills.

You need to finish a program at some technical school that offers the course. After that, you need to finish an apprenticeship program with a business. Programs usually require up to 2,000 hours of on-the-job training that’s paid for every aspiring plumber.

Know what kind of plumbing category you are actually interested in, fill out the application form for it and then pay the required application fees. The range of the fees as of 2012 is from $100 to $450.

Before you compare tankless water heater prices, you first need to determine the right size tankless model for your home. If you choose a model whose capacity is too low, you won’t have the hot water you require. If you choose a unit that is too large you will be paying a higher price than you need to.

The first factor that you need to consider in sizing a whole house water heater, is the hot water demand of your home. If you have a large household, and you use several hot water fixtures at the same time during peak usage times, you will need a more powerful tankless unit than a small household who only uses a shower and a hand basin at one time. Your plumber can assist you in determining your hot water demand in gallons per minute (gpm).

The second factor that you need to consider in determining the right size tankless model, is the average winter groundwater temperature in the area where you live. The lower the groundwater temperature, the more powerful the unit needs to be in order to raise the water temperature to your desired hot water temperature.

The capacity of a tankless water heater is always stated as the flow rate, in gallons per minute (gpm), that it can handle while instantly producing a particular temperature rise. For example, the Rinnai R75L has the capacity to handle a flow rate of 7.5 gpm (3 showers) while producing a temperature rise of 35 degrees Fahrenheit. For a temperature rise of 60 degrees it can only handle a flow rate of 5.0 gpm (2 showers). If you exceed the flow rate capacity of your model, you water will not be as hot as you would like it to be.

When marketing their tankless water heaters, many manufacturers inflate the ability of their models by only stating their warm groundwater water capacities. When you compare tankless water heater prices, you should, therefore, always compare the prices of units that have the capacity to satisfy your hot water demand at the required temperature rise for your area.

Tankless water heaters come in electric and gas models. At first glance it may appear that the electric models are cheaper, but when you compare the prices of models of the same capacity, you will find that the prices are fairly similar. You will notice that tankless gas units have much higher capacities than electric models.

When comparing prices you should consider tankless gas models manufactured by Noritz, Bosch, Rheem, Takagi, Rinnai and Paloma. The best electric tankless models to consider, are manufactured by Stiebel Eltron, Titan, Bosch, Eeemax and Seisco.

Finally, when you compare tankless water heater prices, you should also consider the installation costs. If you are replacing an electric or gas storage tank unit, you will need to upgrade your existing gas lines or electric supply. The electrical upgrades will generally be a lot cheaper than the required upgrades to gas lines and venting systems.

Article Source: http://EzineArticles.com/3380895

Everyone is trying to save money in this struggling economy, and Noritz water heaters can help in this effort. Tankless models do not store hot water, but heat the water on an as-needed basis. Because of this instantaneous process, less energy is required to operate the unit. Tankless water heaters can really make a difference. These tankless wonders can furnish hot water for three to six showers at one time, depending on the model.

A typical family can have an endless supply of hot water forever, if they upgrade to a top rated product from a company like Noritz. It should be noted that there are other top rated brands of tankless water heaters including:

  • Rinnai
  • Rheem and
  • Navien.

According to the manufacturer, up to fifty percent less energy is used, which can result in substantial savings in the homeowner’s utility bills. It has been estimated by some that these kinds of units will last two to three times longer than conventional units resulting in even more savings for the homeowner.

In addition to financial savings they save time since family members do not have to wait for the water to become hot enough for their shower or bath. Another interesting feature is the way these types of water heaters mount on a wall rather than on the floor. This means less wasted floor space, which most homeowners will really appreciate.

Some models of Noritz tankless water heaters qualify for the Federal Energy Tax Credit. The amount of this credit can be up to fifteen hundred dollars, depending on the model chosen. The customer should look for models having the Energy Star Certification.

Although tankless water heaters are just beginning to catch on in the United States, they have been used widely in other countries in Europe and Asia for years. Noritz water heaters are used by some of the world’s finest luxury hotels and spas. According to the Noritz company, all components of the heaters are made by Noritz, and there are no other tankless waters on the market today with better quality.

Article Source: http://EzineArticles.com/5079007

Tankless heaters are becoming more and more popular thanks to government rebates, credits, a reputation for efficiency and their long term conservation of water and electricity. There are various brands of tankless water heaters. In this article I’d like to shine the spotlight on Rinnai, Noritz and Bosche, three of the best brands in my opinion. It’s my goal to give you some detailed information on these brands.

Rinnai

Rinnai Corporation has been responsible for some of the most innovative products since the 1920. Rinnai’s US based product line has grown from spa heaters, tankless water heaters, fireplaces, hydronic air handlers, direct vent wall furnaces, portable cook tops and even commercial grade rice cookers. Rinnai Corporation is committed to the conservation of energy and the best products on the market.

The Rinnai heaters are very compact measuring in at 19 inches in width, 26 inches in height, and 10 inches in diameter. The actual hot water capacity ranges from.04 to 9.8 gallons per minute. Residential temp range on Rinnai tankless water heaters is 98 to 140 degrees Fahrenheit.

Each tankless hot water heater features digital controls that provide exact tem setting so you can set your water temp the way you feel most comfortable. These heaters will not corrode since the water is not actually stored. These water heaters actually have a life span of more than 20 years. The Rinnai RC98Hpe is considered to be a “Green” water heater since they provide lower gas emissions and they are also considered to be water conservers since there is no tank to store the water.

Noritz

The vision of Noritz is to improve the way that hot water is used, and to help eliminate harmful effects that occur to our environment. They are a fairly new company in the industry compared to the others, they do have the largest manufacturing plant for tankless water heaters.

They offer products that compact and easy to install. The supply of water provided by Noritz tankless heaters is pretty impressive, at 13.2 gallons per minute. A massive advantage is the 10 year warranty on the heat exchanger, and they also provide a 3 year warranty on most other parts of the heater.

The electronic controls are pretty cool, they allow users to prevent scalding issues, and the newer models even come with alarms that go off when a certain amount of water has been used. Check out, the N-084M-DV, the N-132M, and the n-084M for heavier demand. Check out the N-69M-OD, N-063-OD, and the N-063S for simple household needs.

Bosch

Bosch is a company well known for their innovative products and it is one of the top selling tankless water heaters manufacturers out there, they also have a manufacturing plant here in Charleston, South Carolina. Bosch offers a very attractive 12 year warranty, making it the longest warranty than any of their competitors.

Their tankless water heaters are specifically made to save space and they are also extremely efficient. Bosch tankless heaters deliver more than 7 gallons of water per minute, ensuring you do not run out of hot water.

Bosch tankless heaters are light weight, they also have freeze protection built in with a 120 volt electronic ignition. What Bosch has to offer is definitely premium quality.

Article Source: http://EzineArticles.com/3671622

Plumbers provide a service, but the end result is a little more important than nailing that perfect haircut or getting your latte order just right. You probably have a favorite hairdresser and coffee house-and you probably found them after much trial and error. When it comes to plumbing, you can’t afford the luxury of choosing the wrong plumber. One oops and your drains might never be the same again.

There are three major things to consider when hiring a plumber: Reputation, experience and customer service. A great place to start is word of mouth, whether it’s a friend’s recommendation or a slew of positive online reviews. If others have had a good experience with a plumber, there’s a good chance you’ll have the same. When poring over those recommendations and reviews, here are a few things to keep an eye out for:

1. Licensed, Bonded and Insured

This trifecta might vary from state to state, but you need to make sure any plumbing contractor you hire holds accreditation or licenses for your particular state. Otherwise, you might find yourself in a world of financial hurt. This is something plumbers should be upfront about, and they should have proof ready to hand over. If they “can’t find it” or try to talk their way out of it, move on.

2. Testimonials

A plumber shouldn’t have to be in business long before they can drum up a few testimonials. A great plumber has a few customer reviews featured on their website, or at the very least can deliver some upon request. It’s wise to get the contact information of their references and actually check them out. A plumber’s cousin might really be the person behind those “glowing” reviews.

3. Experience with Your Issue

It doesn’t matter how many bathroom faucets a plumber has installed if what you need is a water heater replaced. Most plumbers who’ve been in the business a few years have experience in almost everything. If you have a unique problem, it’s worth seeking out a plumber who’s tackled it before. It all comes down to years of experience.

4. Respect for Your Home

You’ll have to trust your gut instinct (and the reviews) for this one. Depending on how big the project is, the plumber you hire might be in your home for a few days or even weeks. You, your family and your home deserve to be treated respectfully, which means the contractors clean up after themselves and sticks to the agreed upon schedule.

5. The Latest Tools and Technology

The degree of “high techiness” might vary depending on how in-depth your project is. For example, a pipe camera can be a great tool to see exactly what’s causing that clog, making the fix faster and easier. Is it the MIA Barbie head or a wad of toilet paper? Different problems call for different un-clogging approaches.

6. Impeccable Customer Service

Customer Service is a little bit different from respect for your home-this is solely respect for you. It’s not just the contractor who should deliver superior customer service, but his entire company. You should feel welcome and respected when you talk to the receptionist, and it should always be easy to reach someone via phone or email.

The relationship between homeowner and plumber isn’t something you should rush into blindly. Research your options before an emergency happens. Having a professional in your corner is a must for peace of mind and fast, quality fixes.

Article Source: http://EzineArticles.com/7864406

Do you really need an emergency plumber? If you are building a swimming pool, you probably don’t, but if the inside of your house starts to imitate a swimming pool, you most probably do.

There are undoubtedly jobs that require the services of a licensed plumber, such as when your toilet backs up into your tubs and sinks, or when you require putting in a new pipe line. However, there are jobs that require not just any plumber but an emergency plumber, such as when water uncontrollably runs out of your faucet and toilets starts flooding the house. However, they are at a premium. How do you know if there is a need for their services or not?

Do You Really Need An Emergency Plumber?

Before contacting any plumber, you would need to turn off the water supply, or if possible the waterline that supplies the fixture. This will prevent any further water damage. This would also most likely stop the flow of water. Once you’ve stopped the water flow, assess the situation. If the problem is an overflowing toilet, you will be all right until the morning, as long as you don’t flush. You could also wait in the morning if you will be able to find alternatives, such as using the kitchen sink instead of the bathroom sink. You can then avoid paying for premium for calling in a 24-hour plumber during the night hours, or during holidays or weekend.

Calling an Emergency Plumber

However, if after turning off the water and assessing the situation, and your plumbing crisis cannot be put off, be prepared before calling an emergency plumber and have some information and questions readily available when you get hold of one.

Before calling the plumber’s number, try to identify the problems as closely as you can. The more specific and more details you can provide, the better they will be able to gauge the emergency and estimate the cost of repair.

It is also a good idea to call several plumber’s numbers if you do not yet have a licensed plumber of choice. You will be able to get several quotes of service call fees as there could sometimes be significant difference in prices.

Also ask for a quote for the service call. Some will charge for simply coming to your house, even if they would not be doing any repairs then. Make sure to ask for this amount ahead of time, and not be surprised by it in your bill.

Ask for an estimate for the total cost of repairs. Some 24-hour plumbers will not want to give an estimate over the phone, and would want to personally assess the plumbing situation first. But you may be able to get a rough estimate and an idea of the price if you come well-informed about the plumbing emergency. Picture out the scenario to your emergency plumber and ask for the usual or average cost of repair.

If you are calling an emergency service, always ask for the emergency plumber to call you first, so that you will be able to talk to the plumber personally and get a better estimate of cost.

So for the time when you wake up at night and the house starts to be like an indoor pool, don’t panic. Stop the water flow, assess the situation, and if it is an plumbing crisis that need immediate action, call an emergency plumber to come out to your house.

Article Source: http://EzineArticles.com/6415863